Electrician and Network
Our labelling range specifically for electricians and network infrastructure has been designed to make your life easier on site.
The top six reasons for labelling:
Leave your work clearly and neatly labelled. Use a Brother P-touch label printer to create labels for: cables and cabling, wires, fuse boxes, faceplates, distribution boards and consumer units.
Also ideal for: warning and hazard signs, bus duct risers and electrical trunking and conduits.
You can also create labels that contain your contact details (including company logo on PT-E550WVP), to help guarantee work in the future.
Simplify the installation of cables by attaching a Brother durable label to each end of the wire. This helps ensure connections are made correctly and minimises the time taken for troubleshooting and fault finding if
there are problems.
By using Brother genuine tapes in your P-touch label printer, you can be assured that labels you create will be legible and stay attached for years to come.
The Brother P-touch PT-E550WVP in conjunction with the Cable Label Tool app for Apple and Android devices allows the creation of labels that meet many of the identification requirements of the electrical regulations.
And our strong adhesive tapes meet the Underwriters Laboratories UL-969 standards, while our heat-shrink tube tape meets UL-224 standards.
Any follow-up visits for maintenance or testing are made easier thanks to clearly labelled faceplates, panels, cables and wires, conduits and machinery.
Ensuring hazards are identified and appropriate signage applied is a critical. The P-touch PT-E550WVP with its large 24mm tape width produces text that's easy-to-read, and by using yellow or red coloured tape makes
signs that are highly visible.
Public Safety Information
Print highly visible general warning signs on demand, wherever and whenever required. Brother fluorescent yellow and orange labels can be used to warn of potential danger, printed and applied immediately to the area
Tapes for cable marking
Brother recognizes the importance of correct and reliable cable and wire identification.
That is why we have developed four different types of tapes for cable marking:
Flexible ID Tape (TZe-FX series)
Developed for electricians, network infrastructure, panel builders and other industries that require a reliable identification solution, this tape can be used to mark cylindrical shaped items where other
tapes may peel over time.
- For wrapping around cables with a diameter of 3mm or more.
- Use as a flag label around cables with a diameter of 3mm or more.
Self-Laminating Tape (TZe-SL series)
The protective overlaminate being applied to the whole label at the time of printing can wrap around CAT5E and even the thicker CAT6A network cables providing extra protection for the text on the label.
- Use 24mm label width for cables with a diameter of 3mm to 6.6mm.
- Use 36mm label width for cables with a diameter of 3mm to 10.4mm.
Die-cut Flag Tape (FLe series)
Suitable for cables with small diameter and ideal for fibre optic cable identification in the network industry. The label is pre-cut and once printed, once printed the long "tail" can be placed around the
cable and the label simply folded over the tail to lock the label into position.
- For cables with a diameter of 2.0 to 8.0mm.
Heat Shrink Tube (HSe series)
This non-adhesive marker is made of a special material that is stored in the tape cassette as a flat tube. Once printed, the tube is opened up and passed over a cable or terminating connector. After
heating, the tube will shrink to about half its original width, taking the shape of the cable or connector.
- For identification of cables and terminating connectors.
* Available on PT-E550WVP model.
** Available for use with PT-E300VP / E550WVP